Skip to main content
July 1, 2026 · By Piyush Sahoo · Updated November 3, 2026 Caller ID is the calling number that a phone network delivers with a call. CNAM, or Caller ID Name, is a separate name record. On US networks, the recipient’s carrier looks that record up using the number. The number travels in the call signalling, while the name usually comes from a database. This guide follows both through the network, explains each way a name goes missing, and maps every symptom to a fix. It also shows why India’s rules work differently.
Key takeaways
  • The number and the name take different paths, so a correct number says nothing about whether a name will show.
  • In the US, the recipient’s carrier decides whether to look a name up, and that carrier pays for the lookup.
  • CNAM labels a number. STIR/SHAKEN signs the number. Neither one removes a spam label.
  • A name you set on your outbound call isn’t a CNAM record. Whether it displays depends on the path and the destination.
  • CNAM is a US and Canada mechanism. India uses Calling Name Presentation, which draws on the operator’s subscriber record.

How do caller ID and CNAM differ?

Caller ID is the broad feature, and CNAM is the part that supplies a name. The FCC’s own history of the terms draws the same line: “Caller ID” meant presenting the number, and “Caller ID with Name” added a name from a CNAM database.

What actually travels with the call?

Only the number travels with a US phone-network call. US rules require providers to transmit the calling number on phone-network traffic, and intermediate providers must pass it on unaltered. A caller can still hide the number from the recipient. The same rule treats *67 as a request not to pass the number on an interstate call. The last hop depends on the line. On analog lines in North America, the switch sends the data between the first and second rings, like a brief modem burst. On IP networks, identity has more places to sit, and those places aren’t equal. This is where most confusion starts, because a developer can set a name in the signalling and assume it’s now CNAM. Four rows compare where identity sits on an IP call. The From display name is self-asserted. P-Asserted-Identity is trusted inside a domain. The Identity header with PASSporT signs the number. The rcd claim signs a name. Four rows compare where identity sits on an IP call. The From display name is self-asserted. P-Asserted-Identity is trusted inside a domain. The Identity header with PASSporT signs the number. The rcd claim signs a name. Each row answers a different question:

How does a CNAM lookup work?

A CNAM lookup, or “dip”, is a database query the recipient’s carrier makes when a call arrives. Wikipedia’s entry describes the split of duties, and the diagram separates them. Before the call, the number owner requests a name, the issuing carrier writes the record, and CNAM databases hold copies. During the call, only the number passes from caller to originating carrier to terminating carrier. The terminating carrier dips a database and passes the name to the handset. Before the call, the number owner requests a name, the issuing carrier writes the record, and CNAM databases hold copies. During the call, only the number passes from caller to originating carrier to terminating carrier. The terminating carrier dips a database and passes the name to the handset. Three details explain most odd behaviour: Mobile adds another layer. Support varies by carrier and device, and some US mobile carriers now deliver names and spam alerts through their own services.

Why does your name show wrong or not at all?

Read the screen first, because each symptom points at a different layer. Wikipedia covers the skipped lookup and the “not available” and “restricted” cases. The last row matters most, because changing the name does nothing for a spam label.

How should you pick and register a CNAM name?

Treat 15 characters as a hard budget that includes spaces. Your carrier may also limit the character set to uppercase letters, digits, and spaces, so check before you submit. Here’s a worked example with a made-up business: Use one abbreviation across your whole number pool. Mixed spellings make one company look like several. Registration goes through whoever issued the number, and many providers handle it as a support ticket. There’s no fixed timeline, because databases update separately and a provider can hold its own copy after an update. So register well before a campaign starts. If you port a number, plan to register it again, because the record can stay with the old carrier. Toll-free numbers need a separate check. Somos describes a toll-free name database, filled by Responsible Organizations (Resp Orgs), that terminating carriers can dip. Ask your provider, then test on the carriers you care about.

CNAM, STIR/SHAKEN, or branded calling?

These three answer different questions, so one can’t stand in for another.

How attestation works

Attestation states what the signing provider knows about its customer and that customer’s right to the number. RFC 8588 carries the level as A, B, or C and leaves the definitions to an ATIS standard. The FCC’s May 2026 further notice (FCC 26-32) summarizes them:
  • A, full. The provider originates the call, can identify its customer, and has verified that customer’s link to the number.
  • B, partial. The provider originates the call and can identify the customer, but hasn’t verified the link to the number.
  • C, gateway. The provider has no relationship with whoever originated the call, as when it acts as an international gateway.
US voice providers had to implement STIR/SHAKEN on their IP networks by June 30, 2021, with listed exceptions. A signature only covers the number, though, so a valid A-level call can still come from a scammer. FCC 26-32 quotes an October 2025 industry filing as saying that “48 percent of illegal calls are A-attested”, and it proposes writing the attestation levels and their criteria into FCC rules. That’s the state of play as of the notice’s adoption on May 20, 2026.

Where branded calling is heading

The FCC made a related point in October 2025. Its further notice (FCC 25-76) argues that an A-level indicator alone doesn’t tell consumers enough. It proposes that terminating providers transmit a verified caller name whenever they show that indicator, and it asks about using Rich Call Data for this on IP networks. This is still a proposal as far as we can tell. Mintz’s November 2025 summary describes it as one, and FCC 26-32 still called it a proposal in May 2026. We found no final order when we searched on November 3, 2026, but we couldn’t read the docket itself. Check it before you plan around this. Commercial programs already exist. Branded Calling ID is a US program that uses signed calls to carry a vetted name, logo, and call reason to smartphones.

What about spoofing a name or number?

US law targets intent. The rule bars causing misleading caller ID to be displayed with intent to defraud, cause harm, or wrongfully obtain value. Take legal advice before you present anything other than a number and a name that you’re entitled to use.

How does caller name display work in India?

India doesn’t use CNAM. It’s introducing Calling Name Presentation (CNAP), and its design differs in who holds the name and how it’s chosen. The DoT’s circular of October 13, 2026 sets out the rules. It sets a start date, but it doesn’t tell you which operators are live, so test on the networks you care about. The diagram stacks each country’s display order. The India side follows the circular. The US side shows a typical order, and carrier apps and handsets can differ. Two stacks show what appears on screen. In the US, a spam label sits over a saved contact name, then the CNAM result, then the number alone. In India, a saved contact name comes first, then the registered name on domestic calls or the words International Call on calls from abroad, shown with the number. Two stacks show what appears on screen. In the US, a spam label sits over a saved contact name, then the CNAM result, then the number alone. In India, a saved contact name comes first, then the registered name on domestic calls or the words International Call on calls from abroad, shown with the number. Three further points from the circular matter to a technical team:
  • 2G, 3G, and fixed-line networks aren’t included yet. The circular says those will be considered separately, so don’t expect every Indian recipient to see a name.
  • Calls from abroad show fixed words. Unless the number is saved, the recipient sees “International Call” rather than a looked-up name.
  • Restricted identity stays hidden. Users on calling line identification restriction don’t have their name presented.
The circular also quotes Rule 48 of the 2026 authorisation rules, which requires calling line identification to be presented in a manner secured from tampering. India also approaches the number differently. Indian rules tie number series to call types: the 140 series carries promotional calls, and the 160 series carries service and transactional calls, including those from BFSI firms. So the number itself tells a recipient something about the call. Spoofed Indian numbers arriving from abroad are filtered at the international gateways. A DoT presentation at a 2025 ITU workshop says its prevention system, commissioned on October 17, 2024, blocked 13.5 million spoofed calls in its first 24 hours. Those are the DoT’s own figures, and they date from late 2024. Elsewhere, don’t assume a CNAM record follows you. Canada lets the originating side supply the name, and in other countries it’s safer to call from a local number.

Which fix should you use for a missing name?

Work down this map from the top. It puts the path and the destination first, because they decide which mechanism applies at all. A decision map with six yes or no questions. SIP to SIP means set the display name. An Indian 4G or newer network means fix the operator record. Outside the US and Canada means use an in-country number. Toll-free means ask your Resp Org. A missing record means register it. A stale result means the carrier cached or skipped the dip. Spam labels are a separate problem. A decision map with six yes or no questions. SIP to SIP means set the display name. An Indian 4G or newer network means fix the operator record. Outside the US and Canada means use an in-country number. Toll-free means ask your Resp Org. A missing record means register it. A stale result means the carrier cached or skipped the dip. Spam labels are a separate problem. We don’t quote a percentage for how much a name lifts answer rates. Published figures tend to come from vendors selling the fix, and the result depends on your list and industry. Measure it yourself by comparing answer rates by number, destination, and carrier.

How does Vobiz handle caller ID?

Vobiz gives you direct control over the number you present, plus the data to see how it’s doing. Everything below is documented, so you can check it against the linked pages. Presenting a number
  • The from field on Make a Call sets the caller ID, in E.164 format.
  • The callerId attribute on the VobizXML <Dial> element sets the number shown on the outbound leg. Use a Vobiz number that your account owns or is authorised to use.
  • For bring-your-own-carrier setups, the presented number must also be one you own on the account.
  • Campaigns can rotate caller ID from a pool of numbers, using Round Robin, Least Used, or Random.
Setting a name in signalling
  • Make a Call accepts an optional caller_name of up to 50 characters.
  • <Dial> accepts callerName, and Vobiz’s docs are direct about it: the destination carrier and device decide whether to display the name.
So plan for these as signalling values, separate from a 15-character CNAM record. Seeing what happened
  • The Call object includes stir_verification, with the values Verified (Attestation A), Not Verified (Attestation B or C), and Not Applicable (for example, non-US calls).
  • Hangup causes separate an unknown caller ID (3030), a carrier spam block (3130), and a Do Not Originate caller ID (3140).
  • The Number Health API returns each number’s status, spam flag, and answer rate, with a daily time series.
Keeping numbers healthy The number health guide covers warm-up, pacing, and repeat-dial limits, and number utilization covers recovery after a flag. Calling within India The calling regulations page lists the Vobiz-rented Indian number requirement, KYC, and the number series. It also lists Branded ID, which displays your business name and logo on the receiver’s screen.
Test calls are real, billed calls. Run them with your own Auth ID and Auth Token, and only to phones whose owners have agreed to receive them.

Frequently asked questions

No. Caller ID usually means the calling number, which travels with the call. CNAM is a name record held in databases. On US networks, the recipient’s carrier looks it up using the number.
The most common reasons are a missing record, a carrier that skipped the lookup, or a cached old result. A SIP-to-SIP call or a call outside the US and Canada won’t use CNAM at all. Check the path first, then the record.
There’s no fixed time. Databases update separately, and a carrier may keep serving an earlier result, so old names can linger. Register well before a campaign, then test on the carriers your customers use.
No. STIR/SHAKEN signs the calling number and gives it an attestation level. Showing a signed name takes Rich Call Data, which is a separate extension that needs carrier and handset support.
You can only register names through your provider, under its rules and limits. US rules bar misleading caller ID used with intent to defraud, cause harm, or wrongfully obtain value. Use a name you’re entitled to, and take legal advice if you’re unsure.
No. India is introducing Calling Name Presentation on 4G and newer networks from November 1, 2026. The name comes from the operator’s subscriber record, and business lines may get a verified preferred name if their operator offers it.

Further reading on Vobiz

Sources

Regulators and government Standards Industry and reference

Build on Vobiz

Get a number and place your first programmable call with your own credentials.