Skip to main content

Can I use a custom carrier for my Retell AI or ElevenLabs workflows?

Yes. Retell AI, ElevenLabs, Vapi, Pipecat, and most modern AI voice platforms support Bring Your Own Carrier (BYOC) — connecting your own SIP trunk provider instead of using the platform’s built-in telephony. Vobiz is designed to work as a BYOC carrier for all major AI voice platforms, giving you control over phone numbers, pricing, regional routing, and regulatory compliance.

Why Use BYOC Instead of the Platform’s Built-In Carrier

Lower cost: Most AI platforms mark up telephony rates significantly. Vobiz direct pricing starts at ₹0.45/min for India, compared to $0.015–0.027/min (approximately ₹1.25–2.25/min) on built-in carrier plans from US-based AI platforms. India phone numbers: Built-in carriers on US-based AI platforms (Vapi, Retell, ElevenLabs) often do not provide Indian DID numbers, or charge a premium for them. Vobiz provisions Indian mobile DIDs, geographic numbers, and TRAI-registered 140-series numbers directly. TRAI compliance: For commercial outbound calls in India, your CLI must be a registered 140-series number. This is only available through carriers with Indian regulatory presence — not through US-based platform built-in numbers. Number portability: When you own the SIP trunk, your phone numbers belong to your Vobiz account — not the AI platform. If you switch AI platforms, your numbers come with you. Regional latency: Vobiz operates media PoPs in Mumbai, Delhi, and Bengaluru. Using Vobiz as BYOC gives your Indian calls local media paths instead of routing through US or Singapore.

BYOC Setup by Platform

Retell AI — Custom Telephony Provider

  1. In the Retell AI dashboard, go to Phone Numbers > Import Phone Number
  2. Select Custom Telephony / SIP
  3. Enter your Vobiz SIP domain, username, and password
  4. Add your Vobiz DID number(s)
Retell AI will route all inbound calls to that number through your Vobiz SIP trunk, and use it for outbound calls from that number. Full guide: Retell AI + Vobiz

ElevenLabs Conversational AI — Custom Phone Number

  1. In ElevenLabs, navigate to Conversational AI > Phone Numbers > Import
  2. Select SIP / Custom Carrier
  3. Enter your Vobiz SIP credentials and DID number
ElevenLabs will establish a SIP connection to Vobiz for inbound calls and use Vobiz for outbound calls from your ElevenLabs agent. Full guide: ElevenLabs + Vobiz

Vapi — SIP Trunk Import

  1. In Vapi, go to Phone Numbers > Import > SIP Trunk
  2. Enter your Vobiz SIP domain and credentials
  3. Assign the number to a Vapi assistant
Full guide: Vapi + Vobiz

Pipecat — SIP Transport

Configure the SIPTransport in your Pipecat pipeline with your Vobiz SIP endpoint URI. Pipecat will use Vobiz for all PSTN connectivity. Full guide: Pipecat + Vobiz

What BYOC Does Not Cover

BYOC controls the telephony layer — phone numbers, carrier routing, and media transport. The AI platform still provides the voice agent logic, STT, LLM, and TTS. You cannot use Vobiz to bypass an AI platform’s core service limits (concurrent agent capacity, model usage, etc.).

Frequently Asked Questions

BYOC (Bring Your Own Carrier) means using your own SIP trunk provider for the telephony layer instead of the AI platform’s default carrier. You provision phone numbers with Vobiz, configure Vobiz as the telephony provider in your AI platform, and calls flow through Vobiz’s infrastructure rather than the platform’s built-in carrier.
Yes. Retell AI’s Custom Telephony feature accepts any SIP trunk. Vobiz provides Indian DIDs including mobile numbers and TRAI-compliant 140-series numbers that work as custom carriers in Retell AI.
ElevenLabs Conversational AI supports SIP-based BYOC for inbound and outbound calls. Some ElevenLabs features (like their built-in number management UI) are only available when using ElevenLabs’ own numbers. BYOC gives you full control but you manage number provisioning and porting through Vobiz directly.
Yes. Most platforms support running both imported (BYOC) numbers and their own numbers simultaneously. Each number is independently assigned to an assistant or agent.
From the Vobiz console under SIP Trunks, you will need: the SIP domain (e.g. youraccount.sip.vobiz.ai), a SIP username, and a SIP password. These are entered directly into the BYOC configuration field of your AI platform.